Universal desktop Tensile Testing Machine for Wire and Cable Tensile Testing(3.0KN)
1. Introduction
The tensible testing machine composed of the control computer is a universal testing
machine designed and manufactured for educational & institutional department like
university and research institution.
PC,full-digital controller, ball screw are integrated into the entire testing system to
move up,down so as to accomplish the tensing, compressing, bending, cutting tests.
Additionally equipped with the testing fixtures, it is widely applied in mechanical
property test for the metals, metalloid,composite etc.
1, the maximum pulling force: 5kg-300kg
2, load resolution: 0.01kg
3. Force measurement accuracy: within ±0.5% of the indicated value
4, display, setting mode: LCD display, digital display real-time force, maximum force, rupture value, elongation, tensile strength (kg / cm2) = rupture value (kg) / test piece cross-sectional area (cm2). Membrane button settings
5, the maximum force value: can store 10 sets of data
6, unit switching: Kg, lb, N (interchangeable)
7, data sampling frequency: 200times / sec
8, test machine resolution: maximum load 1 / ± 25000 yards, internal and external non-file, and the entire resolution is unchanged
9. Pulling induction mode: high-precision sensor is load-bearing element
10, the maximum stroke: 800mm
11, test speed: 25-500mm / min (adjustable, digital display)
12. Displacement measurement accuracy: within ±0.5% of the indicated value
13. The breakpoint ratio is set to 0-99%, and the user can set the appropriate breakage time according to different materials.
14. Safety device: upper and lower stroke limit device, overload protection (10% maximum load, automatic machine protection)
15. Fixture configuration: one set of stretching fixtures (the most ideal test fixture can be designed according to your company's products)
16, print display: optional micro printer can print the date, maximum force, average force and other data
17, working power: AC220V, 50Hz, 5A
1 Main Mechanism
1.1 High stiffness gantry frame structure adopted, with high strength and small
deformation.
1.2 Adopt imported high precision ball screw, transmitted efficient and smoothly.
1.3 Transmission part adopt Arc-gear synchronous belt transmission, with no clearance
in the bidirectional transmission process.
1.4 Adopt AC motor and drive system to ensure the stable transmission and torque, with
over current, over voltage, overload protection devices, speed ratio of 1:10 0000;
1.5 With special designed clamp, it can fix firmly and easy to operate ,without jaw
sliding phenomenon.
1.6 Special process ensured machine alignment, eliminate the influence of irregular
sample to sensor.
| Model | AS-PT- 300 |
| Capacity (Kg) | 50,100,200..300.. |
| Load Accuracy | +-1% |
| Load Resolution | 1/10,000 |
| Valid Width (mm) | 1000mm not included Fixture |
| Max. Route (mm) | 1000(not including clamp) |
| Test Speed (mm/Min.) | 0.1~500(1000) adjustable |
| Speed Accuracy | ±0.5% |
| Motor | AC servo motor |
| Volume WxHxD (mm) | 500x1800x400 |
| Weight (Kg) | 80 |
| Power | AC220V, 1& 3 lines; AC380V, 3& 5 lines |
OUR FACTORY:
ASLi main products: Environmental chambers, temperature (humidity) chamber, PCT /Hast chamber (Highly accelerated stress test chamber),ESS chamber, Walk in stability
Product Tags:
|
|
Universal desktop Tensile Testing Machine for Wire and Cable Tensile Testing(3.0KN) Images
|
